LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (40 - Front Wheel Suspension, Drive Shafts -- PANAMERA (970)) >> WM 405755 Replacing Front Wheel Bearing (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Removing And Installing Wheel Bearing >> Removing Front Wheel Bearing

Removing Front Wheel Bearing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Mechanical, hydraulic or pneumatic press
  • Risk of squashing

→ Read specific safety information for the press.

→ Check that the press is working perfectly before use, particularly the safety components.

Component overview of wheel bearing

Fig 1: Component Overview Of Wheel Bearing
G09807418Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Wheel hub  Pull the inner race off the wheel bearing separately. Carry out a close visual inspection of the seat of the wheel hub. There must not be any scoring, grooves or similar deformations on the hub.
  2. Screw  Use new screws.
  3. Mounting plate  circlip.
  4. Wheel bearing  The wheel bearing can no longer be used once it has been removed. Use a new wheel bearing. Do not press on the inner race. Insert the wheel bearing with the magnetic multiple-pole ring towards the drive shaft. Check the magnetic side (e.g. with a paper clip). Do not use magnets or screwdrivers to check!
  5. Wheel bearing housing  Carry out a close visual inspection of the seat of the wheel bearing. There must not be any scoring, grooves or similar deformations.

    - Wheel speed sensor  Must be inserted with Optitemp LG2 (25-ml spray can, Part No. 000.043.204.21).

scientia non olet · About LEMON Manuals