Installing Cowl Panel Cover

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Insert cowl panel cover into the plenum panel and align it.
Engage locking lug -3- on the cowl panel cover in the retaining strip on the windscreen -4- .

Fig 1: Connecting Cowl Panel Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press locking lugs -2- for the cowl panel cover -1- into the retaining clips underneath.

Fig 2: Installing Cowl Panel Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Place section of cowl panel cover in installation position.
1. 4.1. Fit section of cowl panel cover -1- into the cowl panel cover -arrow A- from outside.
2. 4.2. Press section of cowl panel cover down at the front edge -arrow B- until the locking lug on the section engages in the clip -5- .
  
  Fig 3: Installing Section Of Cowl Panel Cover
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press in fixing clips -2- for section of cowl panel cover -1- and lock into place.

Fig 4: Securing Section Of Cowl Panel Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.