LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (47 - Brakes - Hydraulic Brake System, Regulator -- PANAMERA (970)) >> WM 473919 Removing And Installing Front Brake CALLIPER (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

New disc brake pads require a bedding-in time of approx. 200 km (125 miles)! Only then do they achieve their best friction coefficient and wear value! During this period, the brakes should only be subjected to full stress at high speed in emergencies!

  1. Position disc brake pads by operating the brake several times.
  2. Bleed the brake system → 470107 BLEEDING THE BRAKE SYSTEM .
  3. Fit wheel. Use assembly aids (assembly pins) -1-  . → 440519 REMOVING AND INSTALLING WHEEL .
    Fig 1: Identifying Assembly Aids (Threaded Bolts For Wheel)
    G09808144Courtesy of PORSCHE CARS NORTH AMERICA, INC.