Installing Alarm Siren

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Position alarm siren on the retaining bracket and tighten fastening nut -1- .
Plug in electric connector -A- until it clicks into place.

Fig 1: Installing Alarm Siren
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position retaining plate -A- and tighten fastening screw -1- to → Tightening torque: 2.2 Nm (1.5 ftlb.) and fastening screw -2- to → Tightening torque: 13 Nm (9.5 ftlb.) .

Fig 2: Installing Retaining Bracket For Alarm Siren
Courtesy of PORSCHE CARS NORTH AMERICA, INC.