LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (46 - Brakes - Brake Mechanics -- PANAMERA (970)) >> WM 465419 Removing And Installing Rear Brake Disc (PCCB) (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Explanation Of 2-Part Brake Disc

Explanation Of 2-Part Brake Disc

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. The PCCB brake discs consist of two parts on the front and rear axles. The brake disc -1-  is screwed to the brake-disc chamber -2-  with 10 screws (M6) -3-  .
    Fig 1: Identifying Brake-Disc And Chamber
    G09808079Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Fig 2: Identifying 2-Part Brake Disc
    G09808080Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Only the complete brake disc is available as a spare part (disc + brake-disc chamber)!
  3. Do not separate the brake-disc chamber -2-  and brake disc -1-  . In addition, the screws -3-  must not be turned and should not need to be turned. The screws are prevented from turning by compression in the bushing.
  4. It is essential that the tightening torque of the 10 screws is not changed (do not turn the screws) as this will have a negative effect on the sound behavior.
    1 Brake disc
    2 Brake-disc chamber
    3 Screw (10 ea.)