Wheel Hub Lateral Runout
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
The front face of the wheel hub must not be corroded. If necessary, clean with fine emery cloth.
- Measure the wheel hub lateral runout at the front face of the wheel hub. You should always measure the external and internal diameters of the wheel bolt area.
- Remove brake disc. → 465019 REMOVING AND INSTALLING FRONT BRAKE DISC
- Fit adapter dial gauge set with ball joint arm Nr.147-1 at a suitable position on the wheel bearing housing. Fit the dial gauge with some preload. → Dial gauge on wheel hub