LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging >> WM 214319 Removing and installing charge-air cooler >> Technical values

Technical values

TORQUE SPECIFICATION

Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw for charge-air cooler M6 x 35 Tightening torque 7 Nm (5 ft lb.)    
Screw-type clamps on intake and boost pressure lines   Tightening torque 5.5 Nm (4 ft lb.)    
scientia non olet · About LEMON Manuals