Removing Inner Side Section

Fig 1: Inner Side Section Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

Drill out the connection point on one side only. Do not damage the plate underneath.

1. Drill out spotwelds using spotweld drill;  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Grind down welded seams in area -A-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

3. Heat the bonding surfaces.
   1. 3.1. Remove inner side section.

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.