Technical values
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake calliper to wheel bearing housing | M12/always use new screws or bolts following removal | Initial tightening | 100 Nm (74 ft. lb.) | ||
| Brake calliper to wheel bearing housing | M12/always use new screws or bolts following removal | Final tightening | +90° | ||
| Brake hose to brake calliper | Tightening torque | 20 Nm (15 ft. lb.) |