Removing alarm siren
- Screw off fastening nuts -1-
and remove cover -2-
.
- Remove air inlet -1-
.
- 2.1. Disengage grille -2- in front of the air inlet and pull it to the rear and out of the guides.
- 2.2. Carefully set the grille aside and leave electric plug connection on the air quality sensor -3- connected.
- 2.3. Screw off fastening nuts -4- and remove air inlet.
- Remove alarm siren -1-
.
- 3.1. Release electric plug connection -2- and pull it off the alarm siren.
- 3.2. Unscrew fastening nut -3- and remove alarm siren and holder.