Technical Values
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Fastening screw for positive crankcase ventilation line |
Replace aluminium screw |
Initial tightening |
4 Nm (3 ftlb.) |
|
|
| Fastening screw for positive crankcase ventilation line |
|
Final tightening |
+ 90° |
|
|
| Belt tensioner and chain housing cover to bracket |
M8x96 |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Deflection roller to chain housing cover |
M10x90 (1 ea.) |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Screw securing cable duct to chain housing cover |
Replace aluminium screw |
Initial tightening |
4 Nm |
|
|
| Screw securing cable duct to chain housing cover |
|
Final tightening |
+ 90° |
|
|
| Screw for chain housing cover |
Aluminium screw - replace |
Initial tightening |
4 Nm (3 ftlb.) |
|
|
| Screw for chain housing cover |
|
Final tightening |
+ 90° |
|
|
| Screw for chain housing cover |
|
Minimum torque angle |
+ 50° |
|
|
| Screw for chain housing cover |
|
maximum torque angle |
+ 95° |
|
|
| Screw for chain housing cover |
|
Lower torque limit |
5.2 Nm (3.8 ftlb.) |
|
|
| Screw for chain housing cover |
|
Upper torque limit |
9 Nm (6.6 ftlb.) |
|
|
| Screw for chain housing cover |
Replace aluminium screw |
Initial tightening |
10 Nm (7.4 ftlb.) |
|
|
| Screw for chain housing cover |
|
Final tightening |
+ 90° |
|
|
| Screw for chain housing cover |
Steel screw |
Tightening torque |
10 Nm (7.4 ftlb.) |
|
|
| Screw securing support to oil guide housing |
M8x20 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Screw securing support to chain housing cover/oil guide housing |
Aluminium screw M6 x 30/replace |
Initial tightening |
4 Nm (3 ftlb.) |
|
|
| Screw securing support to chain housing cover/oil guide housing |
|
Final tightening |
+ 90° |
|
|
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Screw for chain housing cover |
Aluminium screw - replace |
Initial tightening |
4Nm (3 ftlb.) |
|
|
| Screw for chain housing cover |
|
Final tightening |
+ 90° |
|
|
| Screw for chain housing cover |
|
Minimum torque angle |
+ 50° |
|
|
| Screw for chain housing cover |
|
Maximum torque angle |
+ 95° |
|
|
| Screw for chain housing cover |
|
Lower torque limit |
5.2 Nm (3.8 ftlb.) |
|
|
| Screw for chain housing cover |
|
Upper torque limit |
9 Nm (6.6 ftlb.) |
|
|
| Screw for chain housing cover |
Replace aluminium screw |
Initial tightening |
10 Nm (7.4 ftlb.) |
|
|
| Screw for chain housing cover Screw for chain housing cover |
Steel screw |
Final tightening Tightening torque |
+ 90° 10 Nm (7.4 ftlb.) |
|
|
| Deflection roller with chain housing cover to upper part of crankcase |
M10x90 (1 ea.) |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Belt tensioner and chain housing cover to bracket |
M8x96 |
Tightening torque |
32 Nm (24 ftlb.) |
|
|