Technical Values
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw for chain housing cover | Aluminium screw - replace | Initial tightening | 4 Nm (3 ftlb.) | ||
| Screw for chain housing cover | Minimum torque angle | + 50° | |||
| Screw for chain housing cover | Maximum torque angle | + 95° | |||
| Screw for chain housing cover | Lower torque limit | 5.2 Nm (3.8 ftlb.) | |||
| Screw for chain housing cover | Upper torque limit | 9 Nm (6.6 ftlb.) | |||
| Screw for chain housing cover | Replace aluminium screw | Initial tightening | 10 Nm (7.4 ftlb.) | ||
| Screw for chain housing cover | Final tightening | + 90° | |||
| Screw for chain housing cover | Steel screw | Tightening torque | 10 Nm (7.4 ftlb.) |