LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (19 - Engine - Cooling 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 195819 Removing And Installing Coolant Regulator (Thermostat Insert) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the coolant pump.

    > 195019 REMOVING AND INSTALLING COOLANT PUMP 

  2. Fit the throttle housing.

    > 244219 REMOVING AND INSTALLING THROTTLE HOUSING

  3. Fill and bleed the cooling system.

    > 195019 REMOVING AND INSTALLING COOLANT PUMP 

  4. After replacing the coolant regulator, the engine control fault memory must be erased Deleting adaptation values). The adaptation adapts to the new thermostat insert.