Removing Coolant Reservoir
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Remove connections and reservoir screws.
Component overview of coolant reservoir
Release and disconnect electric plug connection for the water level sensor
WARNING: Hot fluid- Danger of scalding
→ Avoid contact with hot fluid.
→ Wear personal protective gear.
Information
After pulling off the hoses, close off all openings immediately using commercially available rubber stoppers.
When fitting parts, do not remove stoppers until shortly before installation.
Remove coolant hose -4- .
Release and pull off vent line -3- .
Remove fastening screw -2- .
- Danger of scalding
- Pull reservoir forward out of the guide and remove it in a downward direction -direction of arrow-
.
Coolant reservoir guide