Technical Values -63- Rear Apron
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Mounting for rear apron, top
- 3 - Screw → Tightening torque: 2 Nm (1.5 ftlb.)
Mounting for rear apron at wheel housing
- Screw → Tightening torque: 2 Nm (1.5 ftlb.)
- Screw → Tightening torque: 10 Nm (7.5 ftlb.)
Mounting for rear apron, bottom
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws securing bumper to body | Item 1 | Tightening torque | 40 Nm (30 ftlb.) | ||