Installing Halogen Bulb

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

1. Install halogen bulb -1-  in the headlight.
   1. 1.1. Position halogen bulb in the socket on the headlight in such a way that the guide -2-  is pointing downwards.
   2. 1.2. Bend clip -3- up -a-  and unhook it -b-  .

      Installing halogen bulb 

2. Connect electric plug connection -1-  to the halogen bulb -2-  .

   Connecting electric plug connection 

3. Check condition of the seal -1-  and check that it is fitted correctly on the rear cover -2-  .
4. Position rear cover on the headlight and lock it by turning it in direction of arrow.
5. Check condition of O-ring -3- and check that it is seated correctly.
6. Connect hose connection -4-  for the breather hose at the headlight until it engages securely.

   Installing rear cover