LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 630 (91 Radio, On-Board Computer Park Assist -- (95B) MACAN) >> WM 916219 Removing And Installing Control Unit For Steering Wheel Electronics (Except MACAN Sport Edition) >> Removing Control Unit For Steering Wheel Electronics

Removing Control Unit For Steering Wheel Electronics

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Airbag contact unit not set correctly
  • Malfunction in driver's airbag unit

→ When removing and installing the steering column switch, turn the steering wheel so that the wheels are in straight-ahead position. This ensures that the airbag contact unit is locked in the central position.

→ Do not trap the cable of the airbag contact unit.

→ Check that the cable is routed correctly.

  1. Release electric plug connections -1-  and disconnect them from the steering wheel electronics control unit -2-  .
  2. Unscrew fastening screw -3-  .
    G11982535

    Disconnecting steering wheel electronics control unit 

  3. Carefully disengage locking mechanisms -1-  on the steering wheel electronics control unit -2-  and remove steering wheel electronics control unit from the steering-column switch -3-  .
    G11982536

    Removing control unit for steering wheel electronics 

scientia non olet · About LEMON Manuals