Technical Values
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Fastening screw for drive plate/crankshaft |
Replace |
Initial tightening |
60 Nm (44 ftlb.) |
|
|
| Fastening screw for drive plate/crankshaft |
Replace |
Final tightening |
+90° |
|
|