Installing front strut
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order.
Observe specified tightening torques:
Dome strut to body: Tightening torque 20 Nm (15 ftlb.)
Dome strut to cross panel: Tightening torque 2 Nm (1.5 ftlb.)
Additional reinforcement to body: Tightening torque 20 Nm (15 ftlb.)
Additional reinforcement to dome strut: Tightening torque 20 Nm (15 ftlb.)