LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 612 (42 Rear Wheel Suspension, Drive Shaft -- (95B) MACAN) >> WM 429119 REMOVING AND INSTALLING REAR CONNECTING LINK (Suspension/Stabiliser) >> Removing And Installing Connecting Link >> Installing connecting link

Installing connecting link

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position connecting link -2-  on the removed anti-roll bar -3-  .
    G11985111

    Connecting link on anti-roll bar 

  2. Screw fastening screw -1-  into the nut, but do not tighten it, so that the connecting link -2-  can still move.
scientia non olet · About LEMON Manuals