LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 612 (42 Rear Wheel Suspension, Drive Shaft -- (95B) MACAN) >> WM 423555 Replacing Upper Control Arm >> Replacing upper control arm >> Removing upper control arm

Removing upper control arm

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
G11985034

Upper control arm 

  1. Mark the position of the eccentric screw with respect to the wheel bearing housing for re-installation.
  2. Unscrew fastening screws for the control arm -2-  at the chassis subframe and at the wheel bearing housing (eccentric screw) -1-. 
  3. Remove control arm.
scientia non olet · About LEMON Manuals