LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (74 Seat Cushions, Seat Covers -- (95B) MACAN) >> WM 745619 Removing And Installing Load-Through Provision (Except MACAN Sport Edition) >> Removing Load-Through Provision

Removing Load-Through Provision

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold left and right backrest and load-through provision forward.
  2. Unscrew and remove fastening screws -1-  for the supporting bow -2-  .
    G11982153

    Loosening supporting bow 

  3. Remove supporting bow -2-  by moving it upwards -arrow A-  and unhooking it and pulling it forward out of the cross bolt -arrow B-  .
  4. Lift load-through provision -1-  out of the mount at the left and right -arrows-  .
G11982154

Removing load-through provision 

scientia non olet · About LEMON Manuals