Installing Pressure Sensor

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install pressure sensor.
1. 1.1. Fit pressure sensor with a new seal on the pressure pipe.
2. 1.2. Fit and tighten fastening screws -2- . Tightening torque 5 Nm (3.5 ftlb.)
3. 1.3. Plug in electric plug connection -1- .
  
  Removing and installing pressure sensor

95BAA1

Model year as of 2014

C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C46, C96, C97, C98, C99