Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
All vehicles
- Refer to: SPECIFICATIONS
- Refer to: ENGINE UNDERSHIELD
- Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING
- Refer to: COOLANT EXPANSION TANK
Cold climate vehicles
Cold climate vehicles
Torque Specification: 7 Nm
All vehicles
Torque Specification: 8 Nm
Torque Specification: 7 Nm
Torque Specification: 5 Nm
Torque Specification: 7 Nm
Torque Specification: 10 Nm
Torque Specification: 7 Nm
-
CAUTION: Protect the radiator during this operation.NOTE: With assistance remove the component.
- Release both locking tangs.