LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (Engine Cooling - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine Cooling - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel >> Block Heater >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11715445
  2. CAUTION: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Make sure approximately 2 Liters is drained from the cooling system. Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING 
  4. Refer to: FRONT BUMPER COVER
  5. G11715446

    Drill a 26mm hole in the position shown.

  6. G11715447

    Drill a 26mm hole in the position shown.

scientia non olet · About LEMON Manuals