Front Seat Belt
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw on belt retractor | Tightening torque | 50 Nm (37 ftlb.) | |||
|
Removing seat-belt pretensioner |
|||||
| Fastening screw securing seat-belt mount to door sill | Tightening torque | 50 Nm (37 ftlb.) | |||
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing seat-belt mount to B-pillar | Tightening torque | 50 Nm (37 ftlb.) | |||
|
Seat-belt mount on B-pillar |
|||||
| Fastening screw securing seat-belt buckle to seat frame | Item 1 | Tightening torque | 35 Nm (26 ftlb.) | ||
|
Removing front belt lock |
|||||
| Fastening screw securing front seat-belt mount to floor | Item 1 | Tightening torque | 50 Nm (37 ftlb.) | ||
|
Loosening front fastening point |
|||||
| Fastening screw securing side seat-belt mount to B-pillar | Item 1 | Tightening torque | 50 Nm (37 ftlb.) | ||
|
Loosening side fastening point |
|||||
| Fastening screw securing side seat-belt mount to centre tunnel | Item 1 | Tightening torque | 50 Nm (37 ftlb.) | ||
|
Loosening side fastening point |
|||||