Gap Dimensions Of Door Window/Side Window
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Closing depth of front door window | Z1 | Adjustment value | 3.5 mm | +/-1 mm | |
|
Closing depth of front door window |
|||||
| Closing depth of rear door window | Z2 | Adjustment value | 5 mm | +/-1 mm | |
|
Closing depth of rear door window |
|||||
| Door window with respect to side window | Coupe | Gap dimension | 7 mm | +/-1 mm | |
|
Gap dimension of door window |
|||||
| Door window with respect to side window | Cabriolet | Gap dimension | 9 mm | +/-0.8 mm | |
|
Gap dimension of door window |
|||||
| Door window to Targa bar | Targa | Gap dimension | 16.5 mm | +/-1.3 mm | |
|
Gap dimension of door window |
|||||
| Door window with respect to side window | Rear side window only lowered | Gap dimension | 0 mm | +1 mm | |
| Gap dimension of door window |
|||||
| Side window gap with respect to door window | Gap parallel (A) | Gap dimension | 9 mm | +/-0.8 mm | |
| Side window projection with respect to door window | (B) | Gap dimension | 0 mm | +2 mm | |
|
Aligning the side window |
|||||
| Side window offset with respect to door window | Gap dimension | 0 mm | -2 mm | ||
|
Adjusting the angle of the rear side window |
|||||