Handling The Vehicle Battery
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Battery terminals do not need to be greased.
- The battery terminal clamps should only be attached by hand - without excessive force - to prevent damage to the battery.
- The tightening torque for the battery terminals is → Tightening torque: 6 Nm (4.5 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) .
- If the battery is reconnected, proceed according to → WM 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .