LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (13 - Engine - CRANKGEAR, Pistons -- 911 CARRERA (991)) >> WM 135955 Replacing Crankshaft Sealing Ring (Transmission Side) (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removing and installing flywheel
  • Leaks
  • Risk of damage to the flywheel and adjacent components

→ Be very careful during removal and installation.

→ Get another person to help because of the weight.

Information 

Loosen and tighten screws on the component according to specifications.

  1. Remove transmission.

    → 343519 REMOVING AND INSTALLING TRANSMISSION .

    → 373419 REMOVING AND INSTALLING PORSCHE DOPPELKUPPLUNG (PDK) .

    Manual transmission: 

  2. Remove the clutch.

    → 305019 REMOVING AND INSTALLING CLUTCH .

  3. Remove dual-mass flywheel.

    → 136019 REMOVING AND INSTALLING FLYWHEEL .

    Porsche Doppelkupplung (PDK): 

  4. Remove the flywheel.

    → 136019 REMOVING AND INSTALLING FLYWHEEL - PORSCHE DOPPELKUPPLUNG (PDK) .