LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (94 - Lights, Lamps, Switches, Exterior -- 92A Cayenne) >> WM 944919 Removing And Installing Control Unit For Front-End Electronics (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front footwell outlet vent on driver's side. → 805519 REMOVING AND INSTALLING FRONT FOOTWELL OUTLET VENTS
  2. Install temperature sensor. → INSTALLING FRONT FOOTWELL OUTLET VENTS
  3. Install trim panel under dashboard. → 701919 REMOVING AND INSTALLING TRIM PANEL UNDER DASHBOARD
  4. If a new control unit was installed, the "new" control unit must be taught to suit the vehicle using PIWIS Tester II 9818  . → 944955 REPLACING CONTROL UNIT FOR FRONT-END ELECTRONICS