LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (40 - Front Wheel Suspension, Drive Shafts -- PANAMERA (970)) >> WM 407819 Removing And Installing Front Conventional Connecting Link (Suspension/Stabilizer) (Except PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Removing And Installing Front Connecting Link (Suspension/Stabilizer) >> Removing Connecting Link (Suspension/Stabilizer)

Removing Connecting Link (Suspension/Stabilizer)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Connecting Link (Suspension/Stabilizer)
G09807454Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Raise the vehicle → 4X00IN LIFTING THE VEHICLE .
  2. Loosen fastening nuts -1-  .
    Fig 2: Identifying Connecting Link
    G09807455Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Counter ball pin using a screwdriver 9546  .
    2. 2.2. Remove fastening screw -3-  .
  3. Remove connecting link -2-  .