LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (46 - Brakes - Brake Mechanics -- PANAMERA (970)) >> WM 465002 Checking Front Brake Discs (Wear Assessment) (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Checking >> Brake Disc Lateral Runout

Brake Disc Lateral Runout

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel → 440519 REMOVING AND INSTALLING WHEEL
  2. Adapter plate 9510/1  must be fitted and tightened to tightening torque 160 Nm (118 ftlb.). → Adapter plate on wheel hub 
    Fig 1: Identifying Adapter Plate On Wheel Hub
    G09808005Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Fit adapter dial gauge set with ball joint arm Nr.147-1  at a suitable position on the wheel bearing housing. → Dial gauge on brake disc 
    Fig 2: Identifying Dial Gauge On Brake Disc
    G09808006Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Fit the dial gauge with some preload and measure the lateral runout at the greatest external diameter of the brake disc.
scientia non olet · About LEMON Manuals