Kickdown accelerator pedal module (Cayenne (92A) Tiptronic only)

Necessary after:

• Re-programming DME control unit
• Replacing DME control unit
• Replacing accelerator pedal module

How?

PIWIS Tester:

1. Preconditions:
   1. 1.1. Engine off
   2. 1.2. Ignition on
2. Select menu:
   1. 2.1. DME
   2. 2.2. Maintenance/repairs
   3. 2.3. Adaptations
   4. 2.4. Kickdown adaptation
3. Start function: [F8]
4. Press accelerator pedal fully and release it again after 30 seconds
5. Switch off ignition (see also Information)