Removing Central Cover For Front Underbody

→ Wear personal protective gear.

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment. 
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant. 
• Some steps must be carried out automatically. 
• Some of the repair illustrations show only one side of the vehicle. 

1. Release expansion rivets -3-  and remove them.
2. Unscrew fastening screws -2-  and remove central cover at the front -1-  .
   Fig 1: Removing Cover For Front Underbody Component Location

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.