Installing Front Wire Harness

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The procedure for installing the front wire harness at the left is described here.

Position and engage wire harness on the air grille -2- .

Fig 1: Securing Wire Harness
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Secure the wire harness with the fastening clamp -1- (-arrow- ).
Vehicles with Kessy: Plug in plug connection for proximity sensor -arrow- until the lock locks.

Fig 2: Connecting Connector For Proximity Sensor
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Plug in plug connections for the ParkAssist sensors -arrows- until they engage securely.

Fig 3: Connecting Connectors For Parkassist Sensors
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Plug in plug connection on the side direction indicator light -arrow- until the connector engages securely.

Fig 4: Identifying Connector For Direction Indicator Light
Courtesy of PORSCHE CARS NORTH AMERICA, INC.