Removing Ventilation Grille For Lid (Upper)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ventilation Grille Installation Position For Lid (Upper)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Open the rear lid.
Unscrew fastening screws -1- at the bottom of the rear lid.

Fig 2: Identifying Rear Lid Fastening Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws -1- on the back of the rear lid.

Fig 3: Identifying Back Of Rear Lid Fastening Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove additional brake light. → 947019 REMOVING AND INSTALLING ADDITIONAL BRAKE LIGHT