LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 289 (10 - Engine - Crankcase, Suspension -- 911 CARRERA (991)) >> WM 105519 Removing And Installing Oil Separator (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Information >> Component Information

Component Information

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Oil separator
  2. Bracket for oil/water heat exchanger
  3. O-rings (replace and grease)
  4. External Torx screws (M6 x 20)
Fig 1: Overview Of Oil Separator
G09990465Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals