Removing Shift Cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove neutral gear sensor -1- .
1. 1.1. Unscrew and remove two screws -2- .
2. 1.2. Replace screws.
  
  Fig 1: Removing Neutral Gear Sensor
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Move shift lever -1- to 4th gear position.
1. 2.1. Press lower shift lever to the left -arrow- .
  
  Fig 2: Pressing Lower Shift Lever
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 2.2. Check position of shift lever -1- .
  
  Fig 3: Positioning Shift Lever
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew and remove aluminum screws -1- on the shift cover.
1. 3.1. Replace screws.
  
  Fig 4: Removing Shift Cover Screws
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove shift cover -1- and dispose of seal -2- .

Fig 5: Removing Shift Cover And Seal
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean sealing faces.