LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (42 Rear Wheel Suspension, Drive Shaft -- 911 CARRERA (991)) >> WM 425819 Removing And Installing Rear Wheel Bearing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install wheel bearing housing → Installing Rear Wheel Bearing Housing  .
  2. Fit brake cover plate, EPB actuator, brake shoes (remove tie-wraps before fitting the brake shoes!), brake disc, speed sensor.

    Speed sensor: Insert with Optitemp LG2.

scientia non olet · About LEMON Manuals