Removing Rear Closing Panel

Installation position of rear closing panel.

Fig 1: Rear Closing Panel Component Location (Cayman "Black/Style Edition", Boxster "Black/Style Edition", Cayman GT4)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Use a drill bit with a diameter of → Diameter: 6.5 mm  to drill through clinch points. -area A- 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Drill out spotwelds from the inside using a spotweld cutter. -area B- 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

3. Heat bonding areas. Hot-air blower, Leister-Electron/V.A.G. 1416 WE 1119 
4. Remove rear closing panel.