Removing Seal For Sliding-Roof Panel

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

If the support rails on the sliding-roof panel have become detached or are damaged, the sliding-roof panel must be replaced.

Support rails must not be repaired or stuck.

Fig 1: Identifying Seal For Sliding-Roof Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove seal.
1. 1.1. Open sliding roof.
2. 1.2. Pull seal -1- off the sliding-roof panel at one corner.
3. 1.3. Pull off seal all the way around the sliding-roof panel.
  
  Fig 2: Identifying Sliding-Roof Panel Seal
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.