Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic Value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Sliding-Roof Panel To Roof, Front (D1) | Only Lowered | Gap Dimension | 0 mm | -0.5 mm | |
|
Adjusting Height At The Front |
|||||
| Sliding-Roof Panel To Roof, Rear (D2) | Only Raised | Gap Dimension | 0 mm | +0.5 mm | |
|
Adjusting Height At The Rear |
|||||
| Front Fastening Screw | Item 2A | Tightening Torque | 8 Nm (6 ft. lbs.) | ||
|
Adjusting Height At The Front |
|||||
| Fastening Screw On Panel, Centre/Rear | Item 2B, 2C | Tightening Torque | 5 Nm (3.5 ft. lbs.) | ||
|
Adjusting Height At The Rear |
|||||
| Gap Between Sliding Roof Panel And Roof | Gap Dimension | 0.5 mm | -1 mm | ||
|
Checking Panel Joints |
|||||