Interior Equipment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Location	Type	Basic value	Tolerance 1
Fastening screws for glove compartment, top	Tightening torque	3.2 Nm (2 ftlb.)
Securing glove compartment at the top
Fastening screws for glove compartment, bottom	Tightening torque	13 Nm (9.5 ftlb.)
Securing glove compartment at the bottom
Fastening screw for glove compartment, side	Tightening torque	3.2 Nm (2 ftlb.)
Securing glove compartment at the side
Fastening screw securing centre console at the top to tunnel	Tightening torque	9.7 Nm (7.5 ftlb.)	+/-0.9 Nm (+/- 0.5 ftlb.)
Loosening centre console at the top
Fastening screw for upper part of centre console	Tightening torque	3.2 Nm (2 ftlb.)	-0.3 Nm (- 0.2 ftlb.)

Fig 1: Loosening Upper Part Of Centre Console

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Type	Basic value	Tolerance 1
Fastening screw on front centre console	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.3 Nm (+/- 0.2 ftlb.)
Loosening centre console at the front
Fastening screw securing footwell outlet vent trim	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.3 Nm (+/- 0.2 ftlb.)

Fig 2: Removing Footwell Outlet Vent

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1
Fastening screws securing tunnel support to body/dashboard bracket		Tightening torque	23 Nm (17 ftlb.)
Mounting for upper part of tunnel support
Fastening screw securing tunnel support at the side to body		Tightening torque	23 Nm (17 ftlb.)
Mounting for tunnel support at the lower side
Fastening screws securing upper part of lid to lower part of lid	Item 2	Tightening torque	3.2 Nm (2 ftlb.)
Installing upper part of lid
Fastening screw for sun visor		Tightening torque	5.5 Nm (4 ftlb.)	0.5 Nm (0.5 ftlb.)
Loosening sun visor mounting
Fastening screw securing fire extinguisher to centre tunnel and floorpan	Items 1 and 2	Tightening torque	9.7 Nm (7.5 ftlb.)
Installing fire extinguisher