LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (6X Body - Equipment Outside - General -- 911 CARRERA (991)) >> WM 6X00IN Technical Values (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", TARGA 4 GTS, CARRERA 4 Cabriolet "Edition", Gt3 RS) >> Technical Values - Convertible Top, Hard Top >> Seal For Cowl Panel Frame

Seal For Cowl Panel Frame

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw for seal for cowl panel frame   Tightening torque 5.6 Nm (4 ftlb.)    
G09994199

Mounting point for seal for cowl panel frame 
scientia non olet · About LEMON Manuals