Installing Number Plate Cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Install number plate cover.
1. 1.1. Align the number plate cover -1- on the front apron using the cut-out.
  Information
  
  Self-tapping screws are used to secure the number plate cover. When fitting the number plate cover for the first time (e.g. on a new front apron), the screws can be screwed directly into the front apron. There is no need to drill any holes.
2. 1.2. Screw in the fastening screws -2- .
3. 1.3. Position the number plate -3- .
4. 1.4. Screw in the fastening screws -4- .
  
  Fig 1: Identifying Number Plate Cover (Europe With And Without ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 2: Identifying Number Plate Cover (Switzerland Without ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 3: Identifying Number Plate Cover (Switzerland With ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 4: Identifying Number Plate Cover (Japan And USA Without ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 5: Identifying Number Plate Cover (Japan And USA With ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 6: Identifying Number Plate Cover (China Without ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 7: Identifying Number Plate Cover (China With ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 8: Identifying Number Plate Cover (Japan Without ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 9: Identifying Number Plate Cover (Japan With ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 10: Identifying Number Plate Cover (Rest Of World With And Without ACC)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.