Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing rear spoiler to rear apron | Tightening torque | 3.2 Nm (2 ftlb.) | +/-0.5 Nm (+/- 0.5 ftlb.) | ||
|
Removing spoiler cover (tail light) |
|||||
| Fastening screw securing support plate to body | Tightening torque | 23 Nm (17 ftlb.) | |||
|
Fastening screws on support plate |
|||||