LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (66 - Exterior Equipment -- 911 CARRERA (991)) >> WM 665619 Removing And Installing Air Intake (Side Panel) (Turbo, Turbo S, Turbo CABRIO, Turbo S CABRIO, Gt3) >> Removing Air Intake (Side Panel)

Removing Air Intake (Side Panel)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Air Intake (Side Panel) Installation Position
G09995017Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unclip air intake -1-  at the top, bottom and sides from the clips using a plastic wedge.
    Fig 2: Removing Air Intake
    G09995018Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pull air intake forward out of the mountings -arrow-  and remove it.
    Fig 3: Removing Air Intake
    G09995019Courtesy of PORSCHE CARS NORTH AMERICA, INC.