LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (42 Rear Wheel Suspension, Drive Shaft -- 911 CARRERA (991)) >> WM 425819 Removing And Installing Rear Wheel Bearing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake shoes, brake cover plate and electric parking brake actuator.
  2. Remove wheel bearing housing → 425219 REMOVING AND INSTALLING REAR WHEEL BEARING HOUSING .
  3. Remove all accessories from wheel bearing housing (e.g. wheel speed sensor, cable retainer).
scientia non olet · About LEMON Manuals