LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (94 - Lights, Lamps, Switches, Exterior -- CARRERA (997)) >> WM 943619 Removing And Installing Stop Light Switch (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Stop Light Switch

Removing Stop Light Switch

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Stop Light Switch
G09830764Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Switch off ignition and remove ignition key.
  2. Disengage plug from stop light switch on both sides (Arrows a) and remove.
    Fig 2: Disconnecting Plug For Stop Light Switch
    G09830765Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Turn brake light switch 90° counter-clockwise and remove it.
    Fig 3: Removing Stop Light Switch
    G09830766Courtesy of PORSCHE CARS NORTH AMERICA, INC.