LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (96 - Lights, Lamps, Switches, Interior -- 987-BOXSTER-CAYMAN) >> WM 964755 Replacing Bulb For Reading Light (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R) >> Removing Bulb For Reading Light

Removing Bulb For Reading Light

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Incorrect handling of bulbs
  • Risk of damage to bulbs and the bulb housing

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

Fig 1: Identifying Interior Light, Front And Rear
G09593650Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Carefully unclip cover for the interior light at top and bottom using a small screwdriver.
    Fig 2: Unclipping Interior Light Cover
    G09593651Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove defective bulb from the mounting.
    Fig 3: Removing Interior Light Bulb
    G09593652Courtesy of PORSCHE CARS NORTH AMERICA, INC.